Call(424) 424-2302

Rational SelfCookingCenter Back in Service After a Failure During Descaling

Got a code on the screen? Send us a photo. Most of the time it tells us what to bring.

Send a photo of the screen

The call

A hotel kitchen in Van Nuys started the descaling program on its Rational SelfCookingCenter. Partway through, steam started coming out of the unit and the oven stopped working. They called us the same day.

What we found

Once we opened it up, the picture was clear. Steam and water were blowing out from under the heating element gasket on the steam generator. The water had reached the electronics and the heat had melted the pre-fill container at the back of the generator. The drain pump was also dead, the heating element had burned out, and the flowmeter had already been leaking before this happened.

One failure had turned into five. That is typical: a leak on a steam generator rarely stays a leak.

The repair

We assessed everything on the first visit and ordered all the parts at once, so the kitchen would not pay for repeat diagnostics. Most of the parts arrived the next day, and on the third day after the call we were back installing them. The rest had a shipping delay, and we finished the job five days after the call.

We replaced the heating element and its gasket, the pre-fill container, the drain pump and the flowmeter, dealt with the water-damaged electronics, and ran the oven through steam, cleaning and full test cycles.

The result

The oven is back in daily service after a failure that many would have called a replacement.

What we recommend

Descale strictly by the manufacturer's schedule, and never skip it

When descaling is skipped, scale builds up inside the generator tank, clogs the water lines and starts taking out other components along the way.

Install a water filtration system

A combi in Southern California should run on treated, softened water. It is the single cheapest way to protect the steam generator. Our technicians install and service water filtration systems for combi ovens.

Do not ignore small problems

A drip under the oven or a part that "works a bit strange" looks minor, but it ends up expensive. One failed or misbehaving component drags others down with it, exactly as it did here, where a leaking flowmeter and a tired gasket ended in five failed parts.

Catching these early is what keeps a combi running correctly for a long time.

Call (424) 424-2302

See also steam generator repair and descaling.

Tell us what the oven is doing

(424) 424-2302

Call, or send the form with a photo of the screen. We reply within working hours, Monday to Saturday.

Thanks. We have your request and will call you shortly.
Call nowSend error code